CNC-801A injection cleaner & tester
developed with the technology of ultrasonic cleaning and fuel pressure control,
801A is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions.
It can also perform cleaning on the injectors and fuel supply system on vehicle.
Packing: Paper box
Features and Functions:
Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.
To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight.
This test is also for reverse flush.
Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
Injecting flow test: To check the in
Power supply:AC220V±10%/50Hz~60Hz AC110V±10%/ 50Hz~60 Hz
Input power: 250W;
Ultrasonic cleaning power: 100W;
Simulated RPM range: 10～9990rpm; step: 10rpm;
Count range: 1～9999 times;
Pulse width: 0.5～25ms; step 0.1 ms;
Fuel tank capacity: 4700ml;
Dimensions: 550mm×530mm×1400 mm;
Weight: About 80kg.
Adaptor 1 for fuel top-supply injector,Swiss thread adaptor for fuel top-supply injector,Coarse thread adaptor for fuel top-supply injector,Plug for BUICK injector,Hexangular Stopper,O - ring,CNC-Pulse connecting wire,connnecting hose for on-vehicle cleaning,Flush-back Adaptor for fuel top-supply injector,On-vehicle cleaning kit,Ultrasonic Cleaner.