Home | About us | Products | Feedback | Contact us | Download
VAG Commander V8.6
Product Name: VAG Commander V8.6
Part No.: VAG Commander V8.6
Net Weight:
VAG commander 8.6 for the vehicles VW Audi is a Windows-Based diagnostic software. With the help of VAG commander 8.6 you can perform operations with vehicles from the VAG group, which are in most cases unsupported from the producer diagnostic testers. The VAG commander 8.6 for VAG provides you also full diagnostic capabilities for VAG-vehicles.
1.Compatible AVDI
2.Support vag commander 8.6
3.Support update

Function:
1) Extracting security access codes (PIN) by OBDII
2) Programming keys by OBDII. Preparation of dealer's keys.
3) Mileage recalibration by OBDII
4) Clearing crash data DTCs by OBDII
5) Read/Program flash memory of engine control units by OBDII. Options for resetting the number of flashing attempts.
6) Exchange speed limit of MMI-TV system

Standard diagnostic functions:
1) Connect to the device using KWP2000 over TP2.0, KWP2000 over TP1.6, UDS over ISO transport protocol (CAN), KWP1281 or KWP2000 over K-Line
2) For all electronic control units reading identification data
3) For all electronic control units read error (DTCs)
4) For all electronic control units clear error (DTCs)
5) Scan all units
6) Broadcast requests
7) Measured values
8) Adaptation

Special functions:
1) Instrument CAN
(1) With this function you can establish diagnostic session with the Instrument cluster using KWP2000 over TP2.0
(2) You can read current odometer value
(3) You can change odometer value
(4) Added support for VDO Instrument Cluster 2006+
(5) Read/Program memory of instrument cluster immobilizer
(6) Reading security access code of the IMMOBILIZER
(7) Read/Write immobilizer related data
2) EZS - Kessy (Q7/A6/Allroad)
(1) With this function you can prepare dealer key/learn dealer key
(2) Read/Write eeprom from EZS - Kessy (Q7/A6/Allroad)
3) Instrument K-Line
(1) With this function you can establish diagnostic session with the Instrument cluster via K-Line (KWP1281 or KWP2000)
(2) You can Read/Change odometer value
(3) Read PIN code
(4) Read/Write eeprom
(5) Read ROM/Flash from the Instrument cluster
4) Engine Control Unit
(1) Read EDC17/MED17 flash memory
(2) Read/Write of flash memory (EDC15, EDC16 all types Read/Write Flashmemory via OBDII (K and CAN). Calculation of checksums while programming, ME7.1.1, MED9.x, ME7.5)
(3) Read/Write flash counters (EDC16)
(4) Read/Write eeprom (VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.)
(5) Extracting Security access code / PIN (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, EDC17, MED9.x, Simos PPD)
(6) Extracting Component security bytes (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, MED17.5.1, MED 9.x, Simos PPD)
(7) Enable/Disable immobilizer (EDC15, ME7.x, EDC16)
(8) Odometer correction (EDC15, EDC16)
5) Kessy adaptation
This function can be used for adaptation of brand new kessy units to the car. This adaptation can be by CAN TP2.0, K-KWP2000 and also can be used with Porsche Cayenne.
6) TV activation ED1/ED2
(1) Using this special function you can change speed limit of MMI compatible vehicles to change speed where TV becomes OFF
7) Key learning
With this function you can learn key/transponder to the vehicle
8) Dump tool
With this function you can calculate security access codes, change odometer and so on from EEPROM dump from the corresponding unit
9) Airbag
With this special function you can Read/Write EEPROM memory of the airbag module
Clear the crash data of the airbag module
10) Custom Read/Write
Using this application you can read/program memory in some electronic control unit
11) PIN Convertor
12) Service interval
Using this function you can perform reset of the service reminder, reset of the service interval parameters or change service interval options
13) Remote control adaptation
Using this application, you can learn remote controls
14) Navigation
Using this application, you can enable/disable the “Eject” button of the “Navigation” system
15) Cruise control system
Using this application, you can activate/deactivate a cruise control system and change the related
steering wheel electronics( SWE) configuration if SWE unit is available

Support Car List:

1 AN002 - KM-CAN
1 AN003 - PIN-CAN
1 AN004 - IMMO panel
1 AN005 - IMMO panel EDC16
1 AN006 - KM/PIN K-Line
1 AN008 - Flash Counters
1 AN009 - Key learning
1 AN010 - Airbag EEPROM
1 AN011 - TV Activation
1 AN012A- EDC16 Odometer
1 AN012B- EDC16 EEP/PIN/IMMO-off
1 AN014 - EDC17 EEPROM
1 AN015 - Flash Memory ECU
1 AN016 - Dealer key learning
1 AN018 - Dealer key learning Q7
1 AN019 - Prepare Dealer Key Q7
1 AN021 - ME7 EEPROM by CAN
1 AN022 - CDC32xx Programmer
1 AN027 - Q7 2008



Other Similar Tools:

                                                                   Product name    Update Date
  Truck Diag King-Multi Diesel Diagnosis Interface USB Link   2011-10-20 10:40:00
  GM Tech2 with Candi Interface 32MB CF Card+TIS dongle 2011-9-30 16:42:00
  CKM100 Car Key Master 2011-9-22 14:26:00
  Caterpillar PC-based tools 2011-9-22 11:59:00
  Scania VCI2&Scania Truck Diagnosis 2011-9-21 16:25:00
  E85 BioFuel Conversion Kit For 4 Cylinders Vehicle E 85 ev1 connectors 2011-9-20 18:02:00
  Renault + Nissan Key Prog 2 in 1 2011-9-20 11:39:00
  Launch X431 Master latest updated! 2011-9-8 10:09:00
  WIFI OBD AUTO Checker Support iPhone/iPod touch/iPad/PC 2011-9-8 10:08:00
  Mercedes Benz Star Compact 4 2011-8-30 10:49:00
  TwinB MB Star+MINI GT1 Diagnosis 2 in 1 2011-8-30 10:48:00
  D-CAN interface for GT1 and INPA 2011-8-30 10:48:00
  Ford Outcode/Incode Calculator +SW Dongle+2000 Tokens 2011-8-27 11:22:00

  MVCI compatible with Toyota TIS+Honda HDS+Volvo Dida

2011-8-23 9:07:00
  Toyota Denso Tester 2 with LCD Screen 2011-8-19 17:38:00
  Autocom CDP Trucks(Hot)! 2011-8-16 9:40:00
  Honda & Acura Diagnostic System(HDS) 2011-8-16 9:40:00
  XPROG-m programmer  V5.0 2011-8-16 17:37:00
  BMW and Mercedes Benz keys 2011-8-6 12:06:00
  FLY Scanner FLY 308 PRO for HONDA TOYOTA FORD and Mazda 2011-8-4 15:43:00
  Launch X431 Diagun 2011-8-4 15:39:00
  Launch X431 Solo(New)! 2011-7-25 17:42:00
  Toyota ITIS is the 3rd generation diagnotic tool for Toyota 2011-7-22 13:45:00
  Multi Di@g Access 2011-7-21 14:12:00
  Autoboss V30 Universal Car Scanner(Hot)! 2011-7-16 10:35:00
  BMW OPPS For E65 After Models 2011-7-14 17:12:00
  Ford IDS VCM For Ford,Mazada,Juguar,Land Rover 2011-7-13 14:50:00
  Lexia-3 Citroen/Peugeot diagnostic tool 2011-7-12 14:30:00
  Volvo VIDA DiCE 2011 D 2011-7-11 15:11:00
  BMW CAS3 Pro 2011-7-11 11:09:00


 
 
 
 
 
 
 
 
Home | About us | Products | Feedback | Contact us | Payment
© 2008-2009 ccssit.cn All Rights Reserved 技术支持:盈科动力
Address: 303A RM 201 Building PengjiShangBu Industry Factory Shangbu Industry Zone FuTian District Shenzhen City, P.R.C