Frame machine controlling center
The hydraulic system uses N46 anti-wear hydraulic oil. The oil needs to be filtered beforehand by #120 mesh to get rid of impurities before inputting to the oil tank. Please see to add oil until the level above than the centerline of the calibrator.
Lifting up operation:
1)Press the button “UP” on the control panel, then the deck is coming up;
2)Release the button “UP”, the deck stops rising.
Lifting down operation:
1)Press the button “UNLOCK”, then the deck’s safety latch released;
2)Press the button “DOWN”, then the deck is coming down;
3)Release the button “DOWN” and “UNLOCK”, the deck stops declining.